Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

Install the wiper module assembly into the plenum.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the fasteners attaching the wiper module assembly to the plenum.
Tighten: Tighten the fasteners to 10 N.m (89 lb in)
Connect the wiring connector to the wiper motor.

Fig 1: View Of Wiper Module Assembly

Courtesy of GENERAL MOTORS CORP.

Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
Install the wiper arms. Refer to Wiper Arm Replacement .