Installation Procedure
- Position the console into the vehicle.
- Install the console front fasteners.
Tighten: Tighten the fasteners to 2.5 N.m (22 lb in).
- Move the seats forward. Install the console rear fasteners.
Tighten: Tighten the fasteners to 2.5 N.m (22 lb in).
- Install the shift lever boot.
- Connect the console wiring harness to the main body harness located under the front console tray.
- Install the cupholder assembly. Refer to Cupholder Replacement .
- Install the power window switch, if equipped. Refer to Power Window Switch Replacement in Doors.
- Snap the park brake boot into place.
- Install the console trim panels.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.