Scan Tool Data Definitions (L61)
WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
- Cruise Control Engaged
-
Displays Yes / No. Indicates that the powertrain control module (PCM) has seen a transition in the engaged circuit.
- Cruise Enable
-
Displays On / Off. Indicates if the PCM is commanding the cruise control module to inhibit cruise control operation because of a non-cruise control event or the vehicle parameters are out of the cruise control enable criteria.
- Cruise Brake Switch/Clutch Switch
-
Displays Released/Applied. Indicates the current state of the Cruise Brake pedal switch circuit. A closed switch (brake pedal released) indicates B+ voltage on the signal circuit. When you apply the vehicle brakes, the scan tool displays Applied. When you release the brake pedal the scan tool displays Released. This allows the cruise control to be resumed.