LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Shift Lock Control System) >> Repair Instructions >> Shift Lock Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR System. Refer to SIR Disabling and Enabling Zones in SIR.
  2. Remove the console. Refer to Console Replacement in Instrument Panel, Gages, and Console.
  3. Using a screwdriver, disconnect the control cable end from the pin on the control assembly.
  4. Remove the control cable retaining clip.
  5. Press the tabs on the control cable and remove the cable from the control assembly.
    6. Fig 1: Removing & Installing Shift Control Cable From Control Assembly
    GM893834Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the control assembly electrical connectors.
    Fig 2: Removing & Installing Shift Lock Control Assembly Electrical Connectors
    GM893835Courtesy of GENERAL MOTORS CORP.
  7. Remove the control assembly-to-floor pan bolts and remove the control assembly.
  8. If the shifter control assembly is being replaced, transfer the parts as needed. Refer to the appropriate procedures in this service manual.
    9. Fig 3: Removing & Installing Shift Control Assembly
    GM893837Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals