Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.

Install the connector body to the control assembly.
Install the park lock switch to the control assembly.

Fig 1: Removing & Installing Park Lock Switch

Courtesy of GENERAL MOTORS CORP.

Insert the shift lock control solenoid electrical terminals into the connector body.

Fig 2: Inserting Shift Lock Control Solenoid Electrical Terminals Into Connector Body
Courtesy of GENERAL MOTORS CORP.
Install the automatic transaxle control assembly. Refer to Shift Control Replacement in Automatic Transaxle - 4T40-E/4T45-E
Enable the SIR system. Refer SIR Disabling and Enabling Zones in SIR.