LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Shift Lock Control System) >> Repair Instructions >> Shift Lock Solenoid/Switch Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zones in SIR.
  2. Remove the automatic transaxle control assembly. Refer to Shift Control Replacement in Automatic Transaxle - 4T40-E/4T45-E.
  3. Using an electrical terminal pick, remove the shift lock control solenoid electrical terminals (Black wires) from the connector body.
    4. Fig 1: Removing Shift Lock Control Solenoid Electrical Terminals From Connector Body
    GM893818Courtesy of GENERAL MOTORS CORP.
  4. Move the control assembly out of the PARK (P) position and remove the park lock switch by pressing the switch retaining tabs.
  5. Remove the park lock switch connector body from the control assembly, and remove the switch assembly.
    Fig 2: Removing & Installing Park Lock Switch
    GM893820Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals