LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Introduction & Repair Instructions >> Repair Instructions >> Vehicle Speed Sensor (VSS) Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Removing & Installing Transaxle Output Speed Sensor
    GM893903Courtesy of GENERAL MOTORS CORP.
  1. Install the O-ring onto the output speed sensor.
  2. Install the output speed sensor into the transaxle case.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the output speed sensor stud.

    Tighten:  Tighten the speed sensor stud to 11 N.m (8 lb ft).

  4. Connect the electrical connector.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals