LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Front Suspension System) >> Repair Instructions >> Strut, Strut Component and/or Spring Replacement >> Assembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Assembly Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the coil spring and upper strut mount to the J 45400  . See Special Tools .
    2. Fig 1: View Of Compressor Forcing Screw & Coil Spring
    GM743241Courtesy of GENERAL MOTORS CORP.
  2. Turn the spring compressor forcing screw (1) until the coil spring is compressed.
  3. Install the strut to the coil spring and upper strut mount.
  4. Loosely install the strut retaining nut.
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Use a 45 TORX® socket in order to hold the strut shaft. Use the J 42991  to install the upper strut mount nut. See Special Tools .

    Tighten:  Tighten the strut mount nut to 85 N.m (63 lb ft).

  6. Remove the strut from the J 45400  . See Special Tools .
  7. Install the strut to the vehicle. Refer to Strut Assembly Replacement .
scientia non olet · About LEMON Manuals