Digital Radio Receiver Setup: Notes
WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The Digital Radio Receiver Setup option does not contain a submenu. Digital Radio Receiver Setup will configure the following systems:
- DTCs
- GMLAN radio messages
To properly setup the digital radio receiver (DRR), complete the following procedure using a scan tool:
- At the Main Menu screen, select DIAGNOSTICS.
- At the Vehicle Identification screen, select the following:
- Model Year
- Vehicle Type
- At the Vehicle Identification screen, select PRODUCT LINE.
- At the System Selection Menu screen, select Vehicle Control Systems.
- At the service categories screen, select Computer/Integrating Systems.
- Select Module Replacement/Setup.
- Select Digital Radio Receiver.
- Select DRR Setup.
- After the scan tool displays, TEST COMPLETED SUCCESSFULLY, press EXIT.
- Cycle the ignition.