LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Side Impact Module Wiring Harness Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to SIR Inflator Module Handling and Storage Caution in Cautions and Notices.
    CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7  for driver's seat or SIR Disabling and Enabling Zone 9  for passenger seat.
  2. Fig 1: Identifying Side Impact Module Wiring Harness
    GM1506504Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Removal of the right or the left inflatable restraint side impact module wiring harness uses the same procedure.
  3. Remove the inflatable restraint side impact module from the seat. Refer to Inflatable Restraint Side Impact Module Replacement - Front .

    With the seat back panel removed, the inflatable restraint side impact module wiring harness (1) will be exposed.

  4. Remove the clips that fasten the side impact module wiring harness (1) to the seat.