LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 229 (Theft Deterrent System) >> Repair Instructions >> Theft Deterrent Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Theft Deterrent Control Module
    GM860152Courtesy of GENERAL MOTORS CORP.
  1. Push the TDM (2) onto the lock cylinder housing (1).
  2. Install the theft deterrent wiring harness to the steering column harness.
  3. Connect the electrical connector.
  4. Install the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement .
  5. Replace the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  6. Enable the SIR system. Refer to SIR Disabling and Enabling .