Installation Procedure
WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Reach your hand through the access opening in order to install the OnStar® button assembly (2) and connect the electrical connectors (1).
- Install the overhead console door (3). Install the screws securing the overhead console door.
Tighten: Tighten the screws to 10 N.m (89 lb in).
NOTE:
Refer to Fastener Notice in Cautions and Notices.