LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> General Information >> OEM General Information >> Cautions And Notices >> Introduction >> Work Stall Test Caution
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Stall Test Caution

CAUTION: One or more of the following guidelines may apply when performing specific required tests in the work stall:
  • When a test requires spinning the drive wheels with the vehicle jacked up, adhere to the following precautions:
    • Do not exceed 56 km/h (35 mph) when spinning one drive wheel with the other drive wheel stopped. This limit is necessary because the speedometer indicates only one-half the actual vehicle speed under these conditions. Personal injury may result from excessive wheel spinning.
    • If all of the drive wheels are spinning at the same speed, do not exceed 112 km/h (70 mph). Personal injury may result from excessive wheel spinning.
    • All persons should stay clear of the rotating components and the balance weight areas in order to avoid possible personal injury.
    • When running an engine in the repair stall for an extended period of time, use care not to overheat the engine and the transmission.
  • When a test requires jacking up the vehicle and running with the wheels and brake rotors removed, adhere to the following precautions:
    • Support the suspension at normal ride height.
    • Do not apply the brake with the brake rotors removed.
    • Do not place the transmission in PARK with the drive axles spinning.
    • Turn Off the ignition in order to stop the powertrain components from spinning.
scientia non olet · About LEMON Manuals