Test Description
The numbers below refer to the step numbers on the diagnostic table.
- 2: This step determines if a condition is present.
- 5: This step inspects for any recent engine mechanical repairs. An incorrectly installed camshaft, crankshaft, or timing chain can cause this DTC to set.
DTC P0016
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
| 2 |
|
Go to Step 4 | Go to Step 3 |
| 3 |
|
Go to Step 4 | Go to Diagnostic Aids |
| 4 | Observe the DTC Information with a scan tool. Does the scan tool display that DTC P0335, P0336, P0340, or P0341 also failed this ignition? |
Go to Diagnostic Trouble Code (DTC) List - Vehicle in Vehicle DTC Information | Go to Step 5 |
| 5 | Repair one of the following conditions:
Did you complete the repair? |
Go to Step 6 | - |
| 6 |
|
Go to Step 2 | Go to Step 7 |
| 7 | Observe the Capture Info with a scan tool. Are there any DTCs that have not been diagnosed? |
Go to Diagnostic Trouble Code (DTC) List - Vehicle in Vehicle DTC Information | System OK |