LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Vue Base, 2.2 D, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.2L (L61) Introduction >> Repair Instructions >> Accelerator Pedal Position Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the connector position assurance (CPS) from the accelerator pedal position (APP) sensor connector.
  2. Disconnect the APP sensor harness connector.
    Fig 1: View Of APP Sensor Harness Connector
    GM927716Courtesy of GENERAL MOTORS CORP.
    3. IMPORTANT: Due to clearance issues, the upper attachment bolt cannot be removed from the accelerator pedal assembly. Loose then bolt completely and leave the bolt in the component until the assembly is removed from the vehicle.
    IMPORTANT: A speed wrench may be used to aid in the removal and installation.
  3. Remove the APP assembly attachment bolts to the brake pedal assembly.
  4. Remove the APP assembly from the vehicle.
    Fig 2: View Of Accelerator Pedal Position Assembly
    GM898158Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals