LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Vue Base, 2.2 D, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.2L (L61) Introduction >> Repair Instructions >> Ignition Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the intake air temperature (IAT) sensor connector.
  2. Loosen the clamp at the air cleaner assembly.
  3. Remove the push-push attachment from the outlet resonator/duct assembly to support bracket.
    Fig 1: Positioning Outlet Resonator/Duct Assembly
    GM897621Courtesy of GENERAL MOTORS CORP.
  4. Loosen the clamp at the throttle body assembly.
  5. Disconnect the PCV fresh air bent hose at the cam cover.
  6. Remove the outlet resonator/duct assembly.
  7. Disconnect the EI module electrical connector.
  8. If the module only is being replaced, remove the EI module attachment screws.
  9. Remove the ignition module attachment bolts.
    Fig 2: Removing & Installing Ignition Control Module
    GM896789Courtesy of GENERAL MOTORS CORP.
  10. Remove the ignition module housing assembly with spark plug boots.
    Fig 3: View of Ignition Module Housing Assembly With Spark Plug Boots
    GM951506Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals