Scan Tool Data Definitions
- Battery 1
-
The scan tool displays 0-20 Volts. The scan tool displays the voltage as received on the battery positive voltage circuit of the BCM.
- Generator F-Terminal (L66)
-
The scan tool displays the percentage of the field current.
- Generator L-Terminal (L61)
-
The scan tool displays Enabled/Disabled. The scan tool displays Disabled until the engine is running, then the ECM supplies then the percentage value varies depending on electrical loads.
- Generator L-Terminal (L66)
-
The scan tool displays Active/Inactive. The scan tool displays Inactive until the engine is running, then the PCM supplies then the percentage value varies depending on electrical loads.
- Ignition 1 (L61)
-
The scan tool displays 0-20 Volts. The scan tool displays the voltage as received on the Ignition 1 circuit to the ECM.
- Ignition 1 (L66)
-
The scan tool displays 0-20 Volts. The scan tool displays the voltage as received on the Ignition 1 circuit to the PCM.