Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the fuel tank. Refer to Fuel Tank Replacement .
- Remove the fuel pump module. Refer to Fuel Tank Module Replacement - Primary .
- Disconnect the fuel level sender unit and float electrical connector from the underside of the top of the pump module.
- Release the retaining tabs (1, 2) and remove the level sensor by sliding up.
IMPORTANT:
There are 2 fuel level sender unit and float assemblies in the fuel tank. There is 1 located on each fuel pump module. The fuel level sender unit and float is NOT the same for each of the fuel pump modules.