LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Vue Red Line, FWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - 3.5L (L66) Introduction >> Repair Instructions >> Intake Air Temperature (IAT) Sensor 1 Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Install the IAT sensor with a new O-ring.
  2. Connect the IAT sensor harness connector. Push in the connector until a click is heard, then pull back to confirm a positive engagement.
    Fig 1: View Of Intake Air Temperature (IAT) Sensor
    GM1349413Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals