LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine Controls - 2.4L - DTC P0010 To DTC P0341) >> DTC P0201-P0204 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page is about a different car, the 2006 Saturn Ion 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner outlet resonator. Refer to PSD SIE TITLE Error: SIE linked to empty Cell ID 18864  .
  2. Disconnect the fuel injector.
  3. With the ignition ON, engine OFF, probe the ignition 1 voltage circuit of the fuel injector with a test lamp that is connected to a good ground. The test lamp should illuminate.
    • If the test lamp does not illuminate, repair the open or the high resistance in the ignition 1 voltage circuit.
  4. Connect the J 44603  into the fuel injector connector. Start the engine.
    • If the test lamp flashes, test for an intermittent or a poor connection at the fuel injector, or a faulty fuel injector.
    • If the test lamp does not flash, test for an open, high resistance, or a short to voltage in the control circuit of the fuel injector, an intermittent or poor connection at the engine control module (ECM), or a faulty ECM.
    • If the test lamp remains illuminated at all times, test for a short to ground in the control circuit of the fuel injector, or a faulty ECM.
scientia non olet · About LEMON Manuals