Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.

Remove the fuel tank. Refer to Fuel Tank Replacement .
Disconnect the fuel pump module harness electrical connector from the fuel tank pressure sensor.

Fig 1: View Of Fuel Pump Module And Fuel Tank Pressure Sensor Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Position 2 flat-bladed screwdrivers, one on each side of the sensor, near the vacuum port.

Fig 2: View Of Fuel Tank Pressure Sensor

Courtesy of GENERAL MOTORS CORP.

Carefully use the screwdrivers to lift and release the sensor from the fuel pump module.