Body Control Module Replacement

Fig 1: Locating Body Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the drivers side instrument panel (I/P) insulator. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel in Instrument Panel, Gages, and Console.
1	Screws, Body Control Module (Qty: 4) Tighten: 2 N.m (18 lb ft)
2	Module Assembly, Body Control Tip: Disconnect the electrical connectors. Reprogram the body control module. Refer to Control Module References for programming and setup information.