LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2006 >> Relay 3.9 1, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.9L - Introduction (2 Of 2) >> Repair Instructions >> Intake Manifold Tuning Valve Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Apply Lubricate To Valve Blade
    GM1580024Courtesy of GENERAL MOTORS CORP.
  1. Apply lubricate GM P/N 1051344 (Canadian P/N 993037) to the nose of the valve blade (1).
    2. Fig 2: Removing/Installing Intake Manifold Tuning Valve Bolts
    GM1557831Courtesy of GENERAL MOTORS CORP.
  2. Install the intake manifold tuning valve.
    3. NOTE: Refer to Fastener Notice .
  3. Install the intake manifold tuning valve bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  4. Install the power steering pump. Refer to Power Steering Pump Replacement .
    5. Fig 3: Identifying Engine Harness electrical Connector
    GM1675736Courtesy of GENERAL MOTORS CORP.
  5. Connect the engine harness electrical connector (1) to the intake manifold tuning valve.
  6. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
scientia non olet · About LEMON Manuals