Air Temperature Sensor ( Ambient / Intake ): Service and Repair

Intake Air Temperature Sensor Replacement

Removal Procedure




1. Disconnect the intake air temperature (IAT) sensor harness connector.
2. Remove the IAT sensor bolt.
3. While twisting the IAT sensor (3) , pull the sensor from the engine.

Installation Procedure




1. Press the IAT sensor (3) into the engine.

Notice: Refer to Fastener Notice.

2. Install the IAT sensor bolt.

Tighten the bolt to 10 N.m (89 lb in).

3. Connect the IAT sensor harness connector.