Inspection/Maintenance (I/M) System DTC Table
Inspection/Maintenance (I/M) System DTC Table
| System | DTCs Required to Set System Status to YES |
|---|---|
| Catalyst Monitor If an I/M System Status indicator did NOT update to YES during the Inspection/Maintenance (I/M) System Check , review each indicator and reference this table to determine each DTC associated with the I/M System Status Indicator. Each DTC listed below has specific conditions that must be met for the diagnostic to run. Included in these conditions are additional DTCs which, if set, will inhibit these DTCs from running. Reviewing and operating the vehicle within the Conditions for Running for each DTC listed below will allow the I/M System Status Indicators to transition to YES. |
|
| Catalyst | DTC P0420 |
| EVAP | DTC P0442 DTC P0443 DTC P0446 DTC P0449 DTC P0451 DTC P0452 DTC P0453 DTC P0454 DTC P0455 DTC P0496 |
| Oxygen Sensor | DTC P0131 DTC P0132 DTC P0133 DTC P0134 DTC P0137 DTC P0138 DTC P0140 DTC P1133 DTC P2A00 DTC P2A01 |
| Oxygen Sensor Heater | DTC P0030 or P0036 DTC P0053 or P0054 DTC P0135 DTC P0141 |