Circuit/System Testing
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the Stop Lamp/TCC Switch.
- Ignition ON, connect a test lamp between the TCC Brake Switch/Cruise Control Release Signal circuit terminal B and ground.
- If the test lamp illuminates, test the signal circuit for a short to voltage. If the circuit tests normal, replace the ECM.
- If the test lamp does not illuminate, replace the stop lamp/TCC switch.