LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Controls (Introduction)) >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the throttle in the closed position, install the TP sensor and seal.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    IMPORTANT: Install a new TP sensor screw when replacing the TP sensor.
  2. Install the TP sensor screw.

    Tighten:  Tighten the TP sensor screw to 2 N.m (18 lb in).

  3. Connect the TP sensor harness connector (2).
    4. Fig 1: View Of Idle Air Control (IAC) Valve & Throttle Position (TP) Sensor
    GM783168Courtesy of GENERAL MOTORS CORP.
  4. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
scientia non olet · About LEMON Manuals