Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

Drain the washer solvent from the washer solvent container.
Remove the front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
Disconnect the washer pump hose.
Disconnect the washer pump electrical connector.

Fig 1: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the washer solvent container screws.
Remove the washer solvent container from the left frame rail.

Fig 2: Locating Washer Solvent Container

Courtesy of GENERAL MOTORS CORP.