Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the wipers/washer signal switch to the steering column.
Tighten: Tighten the wipers/washer signal switch screws to 2 N.m (17 lb in).
Connect the wipers/washer switch harness connector.

Fig 1: View Of Wipers/Washer Signal Switch Retaining Screws

Courtesy of GENERAL MOTORS CORP.

Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement in Steering Wheel and Column.