Condenser HVAC: Service and Repair

Condenser Replacement

Tools Required

J 39400-A Halogen Leak Detector

Removal Procedure




1. Remove the radiator.
2. Remove the air conditioning (A/C) condenser.
3. Remove the receiver dehydrator, if necessary.

Installation Procedure




1. Install the receiver dehydrator, if necessary.
2. If replacing the condenser add the specified amount of polyalkylene glycol (PAG) oil directly to the condenser. Refer to Refrigerant System Capacities.
3. Install the A/C condenser.
4. Install the radiator.
5. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
6. Leak test the fittings using the J 39400-A.