April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: View Of Rear Object Sensor Electrical Connectors

GM489061

Courtesy of GENERAL MOTORS CORP.

Remove rear bumper fascia. Refer to Rear Bumper Fascia Replacement .

Fig 2: View Of Rear Object Sensor Assembly

GM500502

Courtesy of GENERAL MOTORS CORP.

Lift the locking tabs on the housing (4) and remove the rear object sensor (1).

Fig 3: View Of Spring & Housing

GM489063

Courtesy of GENERAL MOTORS CORP.

Squeeze the spring (1) and remove it from the housing (2).

Fig 4: View Of Rear Object Sensor Housing

GM489064

Courtesy of GENERAL MOTORS CORP.

Release the tabs on the housing and remove.

Fig 5: Painting Rear Object Sensor Bezel

GM489066

Courtesy of GENERAL MOTORS CORP.

Remove the rear object sensor bezel from the rear fascia.