Liftgate Object Sensor
WARNING: This page is about a different car, the 2007 Saturn Outlook. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the right liftgate tape switch.
- Test for 10K ohms of resistance between the signal terminal A and the low reference terminal B.
- If not within the specified range, replace the right liftgate tape switch.
- Disconnect the harness connector at the left liftgate tape switch.
- Test for 10K ohms of resistance between the signal terminal A and the low reference terminal B.
- If resistance is not within the specified range, replace the left liftgate tape switch.