LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Relay 3.9 W >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Locating MAP Sensor Electrical Connector
    GM1675732Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Disconnect the engine harness electrical connector (1) from the manifold absolute pressure (MAP) sensor.
  3. Remove the MAP sensor bracket bolts and bracket.
    4. Fig 2: Identifying Upper Intake Manifold Components
    GM1639213Courtesy of GENERAL MOTORS CORP.
  4. Remove the MAP sensor (1).
  5. Inspect the MAP sensor seal for damage, replace if necessary.
scientia non olet · About LEMON Manuals