BCM Outputs

WARNING: This page is about a different car, the 2007 Saturn Outlook. However, it is still accessible from the selected car via links, so may be relevant.

Backup Lamps: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the backup lamps are turned ON.
DRL Relay Command: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the DRL lamps are turned ON.
Front Fog Lamp Relay Command: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the fog lamps are turned ON.
High Beam Relay Command: The scan tool displays ON/OFF. When the turn signal multi-function switch is placed in the High Beam position, the scan tool will display ON.
LF Turn Signal Lamp: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the left front turn signal is turned ON.
LR Turn Signal Lamp: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the left rear turn signal is turned ON.
Low Beam Relay Command: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the low beam headlamps are turned ON.
Park Lamp Relay: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the park lamps are turned ON.
RF Turn Signal: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the right front turn signal is turned ON.
RR Turn Signal: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the right rear turn signal is turned ON.