LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Sky Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls & Fuel - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Knock Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

IMPORTANT: Rotate the pigtail 90 degrees from vertical before securing the fastener.
    Fig 1: Knock Sensor
    GM1578476Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the KS.
  2. Install the KS bolt.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

  3. Fig 2: Engine Harness Electrical Connector
    GM1590505Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the KS electrical connector (3).
  5. Install the KS electrical connector clip to the oil level indicator tube bracket.