Circuit/System Testing
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the voltage at the battery terminals.
- With scan tool, read the ignition voltage in the EBCM data list. Verify that battery terminal voltage and ignition voltage readings do not differ more than 1-volt.
- If more than 1-volt test the ignition voltage and ground circuits of the EBCM for high resistance or replace the EBCM.
- Go to Charging System Test .