Auxiliary Power Outlet: Service and Repair

Accessory Power Receptacle Replacement - Floor Console

Tools Required

J 42059 Cigar Lighter Removal Tool

Removal Procedure

1. Remove the fuse located in the I/P fuse block.
2. Lift the tether cap and locate 2 square holes in the receptacle.




3. Hold J 42059 at a 30-degree angle as you insert the tool into the receptacle.
4. Position one side of the tool in each hole.
5. Pull the receptacle straight out.
6. Disconnect the connector and remove the receptacle.

Installation Procedure




1. Connect the receptacle connector.
2. Push the receptacle into the side trim.
3. Install the fuse.