Accessory AC and DC Power Control Module Replacement

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Accessory AC and DC Power Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures: Remove the rear compartment trim panel. Refer to Rear Compartment Trim Panel Replacement .
1	Accessory AC and DC Power Control Module Nut (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 6.5 N.m (57 lb in)
2	Accessory AC and DC Power Control Module Procedure Disconnect the electrical connectors. Program the AC and DC power control module. Refer to Control Module References for programming and set up.

Callout

Component Name

Preliminary Procedures:
Remove the rear compartment trim panel. Refer to Rear Compartment Trim Panel Replacement .

Accessory AC and DC Power Control Module Nut (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 6.5 N.m (57 lb in)

Accessory AC and DC Power Control Module

Procedure

Disconnect the electrical connectors.
Program the AC and DC power control module. Refer to Control Module References for programming and set up.