Component Testing
WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Refer to SIR Caution
.
- Ignition OFF, disconnect the harness connector at the audio steering wheel control switch.
- Test for infinite resistance between the voltage terminal and the signal terminal with the switch in the open position.
- If less than infinite resistance, replace the switch.
- Test resistance values between the voltage terminal and the signal terminal with the switch closed in each position and verify readings are approximate to what the schematic reads.
- If values do not, replace the switch.