Installation Procedure
- Install the theft deterrent module.
Install the 2 clips.
- Install the CIM.
- Connect and lock the wiring harness plug.
- Connect the wiring harness holder.
Tighten: Tighten the 3 bolts to 2.5 N.m (22 lb in).
- Install the lower steering column panel.
Install the ignition lock panel.
Tighten: Tighten the 5 screws to 2.5 N.m (22 lb in).
- Install the steering wheel. Refer to Steering Wheel Replacement .
- For reprogramming procedures, refer to Control Module References .
NOTE:
Refer to Fastener Notice
.