Removal Procedure
WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the rear wheel and tire. Refer to Tire and Wheel Removal and Installation .
- Support the rear suspension at the proper D trim height. Refer to Trim Height Specifications .
- Disconnect the air spring leveling sensor arm from the trailing arm.
- Disconnect the air spring leveling sensor electrical connector.
- Remove the air spring leveling sensor nut and remove the sensor.