LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2008 >> Sky Red Line, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Configurable Customer Control System) >> Diagnostic Information & Procedures >> Steering Wheel Controls Inoperative >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the right steering wheel control switch.
  2. Test for infinite resistance between the ignition terminal 3 and the signal terminal 6 with the switch in the open position.
    • If less than the specified value, replace the steering wheel control switch.
  3. Test for less than 5, 400 ohms between the ignition terminal and the signal terminal with the switch closed in each position.
    • If greater than the specified range, replace the steering wheel control switch.