Installation Procedure
- Install the NEW air cleaner filter into the lower air cleaner housing.
- Install the upper air cleaner cover to the lower air cleaner housing.
- Latch the upper air cleaner cover retainer clips.
- Install the air cleaner outlet duct to the air cleaner housing.
- Tighten the air cleaner outlet duct clamp (1) at the air cleaner housing.
Tighten: Tighten the clamp to 4 N.m (35 lb in).
- Connect the engine wiring harness electrical connector (1) to the MAF sensor.
NOTE:
Refer to Fastener Notice
.