Circuit/System Verification
IMPORTANT:
Larger volume fuel tanks and/or those with lower fuel levels may require several minutes for the floating indicator to stabilize. Refer to J J 41413-200
(J 41413-100) operation manual for detailed instructions in Evaporative Emission System Diagnosis
.
- Using the GE-41415-50 , connect the J 41413-200 (J 41413-100) to the vehicle filler neck. See Special Tools .
- Seal the system with a scan tool and use the flow meter on the J 41413-200
(J 41413-100) calibrated to 0. See Special Tools
.51 mm (0.020 in) to determine there is no leak in the EVAP system.
- If a leak is detected, use the J 41413-200 (J 41413-100) to apply smoke to the EVAP system at the filler neck until the leak is located. See Special Tools .