Rear Body Control Module Replacement

WARNING: This page is about a different car, the 2008 Saturn Outlook, 2008 GMC Acadia, and 2008 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Body Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures: Remove the left rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement (Acadia/OUTLOOK with E61) or Rear Quarter Lower Trim Panel Replacement (Acadia/OUTLOOK without E61) or Rear Quarter Lower Trim Panel Replacement (Enclave with E61) or Rear Quarter Lower Trim Panel Replacement (Enclave without E61) .
1	Rear Body Control Module Assembly Procedure Disconnect the electrical connectors. Reprogram the rear body control module if replaced. Refer to Control Module References . Tip: Push in the tab to release the module from the liftgate actuator assembly.

Callout

Component Name

Preliminary Procedures:
Remove the left rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement (Acadia/OUTLOOK with E61) or Rear Quarter Lower Trim Panel Replacement (Acadia/OUTLOOK without E61) or Rear Quarter Lower Trim Panel Replacement (Enclave with E61) or Rear Quarter Lower Trim Panel Replacement (Enclave without E61) .

Rear Body Control Module Assembly

Procedure

Disconnect the electrical connectors.
Reprogram the rear body control module if replaced. Refer to Control Module References .

Tip: Push in the tab to release the module from the liftgate actuator assembly.