Turn Signal Multifunction Switch Replacement

Fig 1: Turn Signal Multifunction Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement .
1	Turn Signal Multifunction Switch Procedure Disconnect any electrical connectors as needed. Depress the locking tabs to remove the turn signal multifuction switch. During installation, make sure both locking tabs are seated.

Callout

Component Name

Preliminary Procedure:
Remove the steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement .

Turn Signal Multifunction Switch

Procedure