LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2009 >> Aura Green Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L - Introduction >> Repair Instructions >> Engine Control Module Replacement (LAT) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Engine Control Module Wiring Harness Electrical Connector
    GM1889665Courtesy of GENERAL MOTORS CORP.
  1. Using a scan tool, retrieve the percentage of remaining engine oil. Record the remaining engine oil life.
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (LAT) or Battery Negative Cable Disconnection and Connection (LZ4, LY7, and LE5) .
  3. Disconnect the body wiring harness electrical connector (1) from the engine control module (ECM).
    4. Fig 2: Identifying Engine Wiring Harness Electrical Connectors & ECM Components
    GM1889666Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the engine wiring harness electrical connectors (2) from the ECM.
  5. Remove the engine wiring harness clips (3) from the ECM bracket (4).
    6. Fig 3: Identifying ECM & Retainers
    GM1889667Courtesy of GENERAL MOTORS CORP.
    NOTE: Control module damage may result when the metal case contacts battery voltage. DO NOT contact the control module metal case with battery voltage when servicing a control module, using battery booster cables or when charging the vehicles battery.
  6. Gently lift the ECM retainers (1) up, disengaging the retainers from the ECM (2).
  7. Tilt the ECM towards the engine and remove the ECM (2) from the bracket.
scientia non olet · About LEMON Manuals