Passenger Presence System Preload System Test Procedure (Existing Module)
- With Service Programming System (SPS) , unlock the PPS module.
- Empty the front outboard passenger seat.
- With the scan tool, perform the Preload Passenger Presence System procedure.
- If the test fails, adjust the seat bottom trim, and massage the cover to ensure unwanted pressure is not present in the specified area, and restart the Passenger Presence System Preload Test (Existing Module).
- Once the test successfully completes, cycle the ignition key OFF.
- Perform the Diagnostic System Check - Vehicle after successfully completing the preload test procedure to ensure the system is functioning properly.