Set Up a Theft Deterrent Module (TDM) Using New Keys: Notes
IMPORTANT:
Use this procedure only if replacing the TDM using new vehicle keys.
The TDM must be replaced prior to beginning this procedure.
The TDM must be replaced prior to beginning this procedure.
- Connect a scan tool to the vehicle.
- With a new, unlearned, vehicle key, turn ON the ignition, with the engine OFF.
- With a scan tool, select Theft Deterrent Module in the Vehicle Control Systems Module Setup data list.
- Select Step 1.
- Select Use New Keys.
- Follow the scan tool on-screen instructions.