LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2009 >> Sky Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 2.0L - Introduction) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of APP Sensor
    GM1593853Courtesy of GENERAL MOTORS CORP.
  1. Install the APP sensor to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the APP sensor nuts and tighten to 10 N.m (89 lb in).
    3. Fig 2: View Of APP Sensor Electrical Connector
    GM1593852Courtesy of GENERAL MOTORS CORP.
  3. Connect the APP sensor electrical connector.
  4. Confirm that the APP sensor connector locking clip is fully secured.
  5. Verify the operation of the accelerator pedal.
  6. Install the knee bolster. Refer to Knee Bolster Replacement (SKY) or Knee Bolster Replacement (Solstice) .
scientia non olet · About LEMON Manuals